HAPPY HOLIDAYS 2018
Accent your nautically-themed rooms with our Sail Away Tie-Up Valance! Adjustable ribbon ties allow for length versatility at the window. For the ultimate seaworthy look layer a pair of matching Sail Away or coordinating Nautical Straights rod pocket panels beneath.
Visit the Related Products tab to view the complete Sail Away and Nautical Straights Collections, and to request fabric swatches. For tips on how to measure your windows, check out the Diagrams tab. See the Description tab for more product information.
Try out our Design-on-a-Photo service to see how this gorgeous Glory Valance will look on your windows before you buy!
Featuring: This lined 50” wide Glory Valance is mounted on a continental rod, and displayed on a 40” wide window. This style is an RLF Home original design.
- Related Products
Sail Away Tie-Up Valance
Sail Away Tie-Up Valance
- The Tie-Up Valance is styled flat with ribbon or self ties. Ties are adjustable, but are not removable. To create the look simply cinch up the bottom edge of the valance; tie the ribbons into bows at your desired length, and pouf the center section (100” will have 2 center sections).
- Suggested length when tied-up: 22” sides | 17” center
- Widths: 50” | 75” | 100” (50” and 75” have 2 ties, 100” has 3 ties)
- Rod Pocket: 3”
- Trim Style: Grosgrain ribbon ties in color shown
- Lined (lining is cream)
- Fabric Content: 100% Cotton
- Curtain Rod Options: Decorative pole with finials | Continental rod | Lock seam rod
- Size Calculations: (Refer to the Diagrams tab for complete instructions on How to Measure a Window.) For continental or lock seam rods, add a total of 7” to the width to allow for the sides of the curtain rod (3-1/2” each side). For a decorative pole with finials, measure the width of the rod between the brackets, and do not include 7” for the sides. For all curtain rod types, add up to an additional 10” to allow for poufing.
How to Measure a Window
Measure windows with a steel measuring tape. Measure all windows in the room, even if they appear to be the same size.
Determine rod placement (options):
- Distance out past window -- 4” each side is a good rule of thumb
- Distance out past window -- abut against outside edges of window frame
- Top of window frame -- corner to corner
- Wall to wall
Determine drapery hardware to be used:
- Determine how far above window to place hardware -- 4” above frame is a good rule of thumb
- Determine return size needed (the distance that the rod projects from the wall/window frame
Measure for drapery length:
- Apron length
- Floor length
- Ceiling to floor
- Allow for floor clearance -- floor length draperies should end 1/2” above floor or just short of the carpet
- Hint: Place a thin piece of cardboard on top of the carpet to help measure evenly.