Our semi-sheer Breezy Pinch Pleat Single Panel is so shabby chic in the color Cloud. For a stylish look, attach pinch pleat panels to  wood clip rings and display from a  decorative wood pole with finials.

Visit the Related Products tab to view the complete Breezy Collection, and to request fabric swatches. See the Description tab for more product information. For tips on how to measure your windows, check out the Diagrams tab.

This style is an RLF Home original design.

  • Products
  • Description
  • Diagrams
  • Related Products

Breezy Pinch Pleat Single Panel

Pinch Pleat Panels



My Cart Your cart is empty.

Breezy Pinch Pleat Single Panel

  • Lengths: 63” | 84” | 96” | 108”
  • Single Panel Width: 25”
  • Panels are sold singly.
  • Drapery pins are included with each panel.
  • Unlined or Lined (lining is cream)
  • Fabric Content: 100% Semi-Sheer Cotton
  • Size Calculations: (Refer to the Diagrams tab for complete instructions on How to Measure a Window.) Pinch Pleat Panels look fabulous as stationary panels for achieving a decorative look. One panel flanks each side of the window. For example use two Pinch Pleat Panels for a 40” wide window; one panel on each side. For wider windows, consider using two panels on each side, for a total of four panels. To achieve a fuller look, increase the number of panels on each side of the window.
  • Curtain Rod Options: For an updated look, our Pinch Pleat Panels are especially pleasing when attached to wood clip rings and displayed from a decorative wood pole with finials. The panels come with drapery pins already attached to the back of each pleat. Simply insert each drapery pin through the eyelet at the base of each wood ring (if purchasing our wood rings, use without the clips). Be sure to purchase a package of 7 wood rings per panel.

We are happy to assist you with questions about ordering our Pinch Pleat Panels. Please contact us at customerservice@rlfhome.com or by calling us at 860-951-8110, ext. *813.

How to Measure a Window

Measure windows with a steel measuring tape. Measure all windows in the room, even if they appear to be the same size.

Determine rod placement (options):

  • Distance out past window -- 4” each side is a good rule of thumb
  • Distance out past window -- abut against outside edges of window frame
  • Top of window frame -- corner to corner
  • Wall to wall

Determine drapery hardware to be used:

  • Determine how far above window to place hardware -- 4” above frame is a good rule of thumb
  • Determine return size needed (the distance that the rod projects from the wall/window frame

Measure for drapery length:

  • Apron length
  • Floor length
  • Ceiling to floor
  • Allow for floor clearance -- floor length draperies should end 1/2” above floor or just short of the carpet
  • Hint: Place a thin piece of cardboard on top of the carpet to help measure evenly.