; )
Outlet Final Sale!
Backyard Trellis Cornice Valance in Green is bright and cheery with an Asian-inspired lattice pattern. This valance has a slight irregularity which can be masked by simply gathering it on the curtain rod, as shown. The valance measures 75” wide when flat. Sold as is; no returns.
Hurry, only 1 in stock!
For tips on how to measure your windows, check out the Diagrams tab. See the Description tab for more product information.
This style is an RLF Home original design.
- Products
- Description
- Diagrams
- Related Products
Backyard Trellis Cornice Valance, 75"W - OUTLET
- Size Calculations: (Refer to the Diagrams tab for complete instructions on How to Measure a Window.)
- Tailored (valance hangs flat across the window): For continental or lock seam rods, add a total of 7” to the width of the window to allow for the sides of the curtain rod (3-1/2” each side). Example: 40” wide (window) + 7” (sides of the rod) = 47”. A 50” wide valance is the perfect choice. For a decorative pole with finials, measure the width of the rod between the brackets, and do not include 7” for the sides.
- Gathered (valance is gathered on the rod to create fullness): For continental rods, lock seam rods, or continental spring tension rods, an easy rule-of-thumb for calculating the size of the valance needed is to use 1.5X to 2X fullness. Example: 40” wide (window) x 1.5 (fullness) = 60” + 7” (sides of the rod) = 67”. Two 50” wide valances will create a full and gathered look. If using a decorative pole with finials, measure the width of the rod between the brackets, and multiply by 1.5X to 2X fullness, and do not include 7” for the sides.
- Length: 16”
- Widths: 50”
- Rod Pocket: 3”
- Trim Style: n/a
- Fabric Content: Linen
- Curtain Rod Options: Continental rod | Lock seam rod | Continental spring tension rod (for inside mounted valances). Curtain rods are not part of the outlet.
How to Measure a Window
Measure windows with a steel measuring tape. Measure all windows in the room, even if they appear to be the same size.
Determine rod placement (options):
- Distance out past window -- 4” each side is a good rule of thumb
- Distance out past window -- abut against outside edges of window frame
- Top of window frame -- corner to corner
- Wall to wall
Determine drapery hardware to be used:
- Determine how far above window to place hardware -- 4” above frame is a good rule of thumb
- Determine return size needed (the distance that the rod projects from the wall/window frame
Measure for drapery length:
- Apron length
- Floor length
- Ceiling to floor
- Allow for floor clearance -- floor length draperies should end 1/2” above floor or just short of the carpet
- Hint: Place a thin piece of cardboard on top of the carpet to help measure evenly.
